|1. How to build your own setup file
- WIRE1x installer is build by NSIS installation program. We use it to package WIRE1x_xxx.exe, DDL, etc. in an installation file.
The following link is our NSIS installer script for WIRE1x Vista installer, you can use it to create your own WIRE1x installer:
NOTE: You need to put UsefulLib.nsh in the NSIS "include" directory.
You can download the unpackaged WIRE1x installer file which include WIRE1x main program, Dynamic-link library files, adm_conf.ini, etc. from here.
The following are the keys which you MUST define in the [SSID] section:
|| Supported Value
||Use this key to set name of the SSID.
||Your network name
||Use this key to set network type of authentication for the SSID.
||Use this key to set your EAP method for the SSID.
||Use this key to set CA certificate file name. The certificate is used to verify server certificate.
||Your file name
|3. Example adm_conf.ini
- The following are example of pre-configuration setting.
You can download from here:
; adm_conf.ini - WIRE1x pre-configuration file
; Manufacturer: WIRE1x Yi-Ken Ho
; You need to set SSID in the section.
; The following sets is WEP
; The following sets is WPA/TKIP
; The following sets is WPA2/AES
; EAP method setting. After EAP-TTLS and EAP-PEAP is tunneled protocol.
; root certificate setting.
; If you don't set this key, WIRE1x will not verify server certificate.